HYGGE KX 500AF Expansion Chamber

-High Temp Ceramic coating is available here. 

WHY THE HYGGE KX 500AF PIPE?!

Do you have an AF conversion and the pipe just doesn’t fit “right”?

Do you want MORE POWER?

Maybe your tired of cracking pipes.

If so, this is your pipe!

- Designed with peak hp in mind, WITHOUT sacrificing power in the bottom and midrange.

- HYGGE KX500AF pipes are designed to fit all chassis up to 2024, while still fitting previous years. We worked with AJ Waggoner from Built500 to ensure the best possible fitment. This includes reducing the typical problem clearance areas most pipes have (Stator cover, cylinder rad hose, kick starter etc.). Pipe mounting locations are the same place as the Service Kawasaki pipes were, as this allows the easiest bolt up, without retrofit.  

- It offers overall strong power from the bottom end, up throughout the midrange. With a focus on exceptional peak hp.

-Pipes are gas welded with oxy acetylene

-Hand planished seams

-Hand Tig Brazed mounting points

-Made in small batches to obtain un-compromised quality

-Designed to work with all stock aftermarket silencers

Watch a video of fitment, durability and performance - from our CR500 chambers but it still applies to these. 
See the dyno results in our blog post